Items where Subject is "Engineering"

Article

Ahmad, Farhan Ammar (2019) Review of isolation enhancement with the help of theory of characteristic modes. Engineering and Applied Science Letters, 2(2019 (1). pp. 12-18. ISSN 26179695

Ahmad, Farhan Ammar and Habiballah, Ibrahim Omar (2019) Robust estimators incorporating voltage and current phasors from PMUs. Engineering and Applied Science Letters, 2(2019 (1). pp. 48-59. ISSN 26179695

Ahmed, Minhaz and Xu, Wang (2023) Investigation of Pile Construction and Productivity Loss: An Analysis of Macro Impact Factor. World Journal of Engineering and Technology, 11 (04). pp. 932-964. ISSN 2331-4222

Anjum, Muhammad Shahzad and Safdar, Muhammad Usman (2019) K Banhatti and K hyper-Banhatti indices of nanotubes. Engineering and Applied Science Letters, 2(2019 (1). pp. 19-37. ISSN 26179695

Asif, Fatima and Zahid, Zohaib and Zafar, Sohail (2020) Leap Zagreb and leap hyper-Zagreb indices of Jahangir and Jahangir derived graphs. Engineering and Applied Science Letter, 3 (2). pp. 1-8.

Aust, Jonas and Mitrovic, Antonija and Pons, Dirk (2021) Comparison of Visual and Visual–Tactile Inspection of Aircraft Engine Blades. Aerospace, 8 (11). p. 313. ISSN 2226-4310

Baba Lawan, Musa and Alhaji Samaila, Ya’u and Tijjani, Ibrahim (2018) Microcontroller Based Electronic Digital Lock with Security Notification. Journal of Engineering Research and Reports, 2 (3). pp. 1-13. ISSN 2582-2926

Bame, Patrick Che and Yamb, Bell Emmanuel and Ndigui, Billong (2023) Assessment of Deviation in Quality of Steel Reinforcing Bars Used in Some Building Sites in Cameroon. World Journal of Engineering and Technology, 11 (04). pp. 917-931. ISSN 2331-4222

Bhatt, Rajen and Sharma, Gaurav and Dhall, Abhinav and Kumar, Naresh and Chaudhury, Santanu (2011) Categorization and Reorientation of Images Based on Low Level Features. Journal of Intelligent Learning Systems and Applications, 03 (01). pp. 1-10. ISSN 2150-8402

Bouyon Yenda, Tracy and Jiguet-Jiglaire, Carine and Khichane, Imene and Gobert, Quentin and Prabhakaran, Rathinasabapathi and De Nonneville, Alexandre and Djenizian, Thierry and Salas, Sébastien and Dallemer, Frédéric (2022) Controlled Synthesis of Small Water-Soluble Hybrid Gold Nanoparticles: An Optimized Strategy for Stable Nano-Dispersion and Towards Cellular Uptake. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Budzisz, Wieslaw and Marciniec, Adam (2022) The New Gear Finishing Method Research for Highly Loaded Gears. Aerospace, 9 (3). p. 131. ISSN 2226-4310

Calappi, Timothy and Miller, Carol (2016) Decay of Pressure Fluctuation in the Hyporheic Zone around a Cylinder. World Journal of Mechanics, 06 (04). pp. 159-168. ISSN 2160-049X

Cary, Michael (2020) A linear algorithm for minimum dominator colorings of orientations of paths. Engineering and Applied Science Letter, 3 (3). pp. 10-14.

Castro, Gabriela González and Fitt, Alastair D. and Sweeney, John (2016) On the Validity of the Imbert-Fick Law: Mathematical Modelling of Eye Pressure Measurement. World Journal of Mechanics, 06 (03). pp. 35-51. ISSN 2160-049X

Cusati, Vincenzo and Corcione, Salvatore and Ciliberti, Danilo and Nicolosi, Fabrizio (2022) Design Evolution and Wind Tunnel Tests of a Three-Lifting Surface Regional Transport Aircraft. Aerospace, 9 (3). p. 133. ISSN 2226-4310

Deng, Yanfang and Tong, Hengqing (2011) Dynamic Shortest Path Algorithm in Stochastic Traffic Networks Using PSO Based on Fluid Neural Network. Journal of Intelligent Learning Systems and Applications, 03 (01). pp. 11-16. ISSN 2150-8402

Duodu, Enock A. and Hinneh, Vivian and Kuttin, Kannie Winston and Otchere, John Nana (2024) Comparative Analysis of Piston Rings Made with Aluminum Titanium Carbide (AlTiC-75-2) and Carbon Cast Steel (AISI 1540) Materials Using Numerical Method. Journal of Engineering Research and Reports, 26 (4). pp. 133-142. ISSN 2582-2926

Dölle, Klaus (2023) Moisture Transfer of Paper for Food Packaging Applications: A Laboratory Study. Journal of Engineering Research and Reports, 25 (11). pp. 177-185. ISSN 2582-2926

Dölle, Klaus and Zoller-Croll, Helga and Blazevic, David and Hörl, Felix and Lexa, Anna and Noss, Fabian and Prasad, Shyam and Richter, Gesa and Schmeckebier, Erik and Slavinskas, Jack and Weiß, Matthias (2024) Sustainable Greeting Card – paper Products Produced on a Laboratory Paper Machine. Journal of Engineering Research and Reports, 26 (6). pp. 198-211. ISSN 2582-2926

Essien, Gabriel and Etuk, Victor E. and Livinus, Aniefiok and Ita, Okon, Edet (2024) Investigation of a Cathodic Protection Configuration for the Steel Casing Pipes in Reinforced Concrete Bridge in the Niger Delta. Journal of Engineering Research and Reports, 26 (5). pp. 20-30. ISSN 2582-2926

Fasogbon, Samson Kolawole and Owora, Chukwuemeka Uguba (2021) Application of Artificial Neural Network in Determining Performance Profile of Compression Ignition Engine Operated with Orange Peel Oil-Based Biodiesel. Journal of Engineering Research and Reports, 20 (12). pp. 1-14. ISSN 2582-2926

Fuadi, Zahrul and Rahmadiawan, Dieter and Kurniawan, Rudi and Mulana, Farid and Abral, Hairul and Nasruddin, Nasruddin and Khalid, Mohammad (2022) Effect of Graphene Nanoplatelets on Tribological Properties of Bacterial Cellulose/Polyolester Oil Bio-Lubricant. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

G. Oseke, G. and T. Isa, M. and S. Galadima, M. and O. Ameh, A. (2018) Kinetic Study, Modelling and Optimization of Adsorption Processes for Removal of Crude Oil from Contaminated Water using Chitosan-Rice Husk Ash Composite. Journal of Engineering Research and Reports, 2 (3). pp. 1-10. ISSN 2582-2926

Garion, Cédric (2014) Mechanical Properties for Reliability Analysis of Structures in Glassy Carbon. World Journal of Mechanics, 04 (03). pp. 79-89. ISSN 2160-049X

Gorgoglione, Michele and Panniello, Umberto (2011) Beyond Customer Churn: Generating Personalized Actions to Retain Customers in a Retail Bank by a Recommender System Approach. Journal of Intelligent Learning Systems and Applications, 03 (02). pp. 90-102. ISSN 2150-8402

Gupta, Aryan and Patel, Meera (2024) Innovative Approaches for Dynamic System Monitoring: Signal Processing and Parameter Estimation Strategies. Journal of Engineering Research and Reports, 26 (5). pp. 31-41. ISSN 2582-2926

Guével, Alexandre and Mielniczuk, Boleslaw and Veveakis, Manolis and Hueckel, Tomasz (2022) Life Expectancy of Evaporating Capillary Bridges Predicted by Tertiary Creep Modeling. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Gülcan, Orhan and Günaydın, Kadir and Çelik, Alican (2022) Investigation on Surface Roughness of PolyJet-Printed Airfoil Geometries for Small UAV Applications. Aerospace, 9 (2). p. 82. ISSN 2226-4310

Hamdaoui, Abdellah and Hihi, Rachida and Braikat, Bouazza and Tounsi, Noureddine and Damil, Noureddine (2014) A New Class of Vector Padé Approximants in the Asymptotic Numerical Method: Application in Nonlinear 2D Elasticity. World Journal of Mechanics, 04 (02). pp. 44-53. ISSN 2160-049X

Hatai, Keigo and Nagata, Taiichi (2022) Quantitative Clarification of Stable Ignition Region for HKP110 Green Hypergolic Bipropellant. Aerospace, 9 (3). p. 129. ISSN 2226-4310

He, Hanqing and Shi, Peng and Zhao, Yushan (2022) Hierarchical Optimization Algorithm and Applications of Spacecraft Trajectory Optimization. Aerospace, 9 (2). p. 81. ISSN 2226-4310

Horner, Colby Niles and Sescu, Adrian and Afsar, Mohammed and Collins, Eric (2021) Numerical Investigation of a Rectangular Jet Exhausting over a Flat Plate with Periodic Surface Deformations at the Trailing Edge. Aerospace, 8 (11). p. 314. ISSN 2226-4310

Iannucci, Leanne E. and Dranoff, Charles S. and David, Michael A. and Lake, Spencer P. (2022) Optical Imaging of Dynamic Collagen Processes in Health and Disease. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Idiapho, Clement A. and Awwal, Sani I. and Emmaunel, Udosoh N. (2020) Performance Assessment of Ship Hull Metal in Seawater Media. Journal of Engineering Research and Reports, 15 (3). pp. 50-56. ISSN 2582-2926

Ihsan Butt, Saad and Nadeem, Mehroz and Farid, Ghulam (2020) On Caputo fractional derivatives via exponential ( s , m ) -convex functions. Engineering and Applied Science Letter, 3 (2). pp. 32-39.

Ita, Meagan E. and Winkelstein, Beth A. (2022) MMPs Regulate Neuronal Substance P After a Painful Equibiaxial Stretch in a Co-Culture Collagen Gel Model Simulating Injury of an Innervated Ligament. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Jeebaratnam, N. and Majumdar, Jharna (2021) Multi Sensor Image Fusion Using Stationary Wavelet Transform and Feature Extraction from Gabor Filter and GLCM Texture. Journal of Engineering Research and Reports, 20 (12). pp. 15-25. ISSN 2582-2926

Jess, Brandi and Brusey, James and Rostagno, Matteo Maria and Merlo, Alberto Maria and Gaura, Elena and Gyamfi, Kojo Sarfo (2022) Fast, Detailed, Accurate Simulation of a Thermal Car-Cabin Using Machine-Learning. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Jr., Edwin Graycochea and Rodriguez, Rennier and Gomez, Frederick Ray and Bacquian, Bryan Christian (2020) Die Attach Machine Selection for Glue Voids Reduction Performance. Journal of Engineering Research and Reports, 15 (3). pp. 1-5. ISSN 2582-2926

Kostenko, Anastassia and Swioklo, Stephen and Connon, Che J. (2022) Effect of Calcium Sulphate Pre-crosslinking on Rheological Parameters of Alginate Based Bio-Inks and on Human Corneal Stromal Fibroblast Survival in 3D Bio-Printed Constructs. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Lee, Dooyoul and Cho, Hwanjeong and Kim, Min-Saeng and Kwon, Kybeom (2022) Probabilistic Risk Analysis of Aircraft Self-Collisions: A Case Study. Aerospace, 9 (2). p. 80. ISSN 2226-4310

Liu, Yang and Xu, Ziyuan and Du, Huafei and Lv, Mingyun (2022) Multidisciplinary Optimization of Thermal Insulation Layer for Stratospheric Airship with a Solar Array. Aerospace, 9 (2). p. 83. ISSN 2226-4310

Lu, Jinwei and Zhao, Ningrui (2021) Application of Neural Network Algorithm in Propylene Distillation. Journal of Engineering Research and Reports, 20 (12). pp. 53-63. ISSN 2582-2926

Mahmood, Sajid and Rafiq, Ammara and Ahmad, Zaheer and Ajmal, Muhammad (2018) In Vitro Comparison of Different Brands of Cetirizine 2HCl Tablets by Spectroscopy and Thin Layer Chromatography (TLC) in Local Market of Lahore, Pakistan. Engineering and Applied Science Letters, 1(2018 (2). pp. 1-9. ISSN 26179695

Mehmood, Sajid and Farid, Ghulam and Khan, Khuram Ali and Yussouf, Muhammad (2020) New fractional Hadamard and Fejér-Hadamard inequalities associated with exponentially ( h , m ) -convex functions. Engineering and Applied Science Letter, 3 (2). pp. 9-18.

Nazir, Kashif and Sheikh, Anwar Khalil and Ahmad, Muhammad Asad (2019) Box-Behnken design of quadratic model for Gas Metal Arc Welding (GMAW) and optimization analysis on desirability function. Engineering and Applied Science Letters, 2(2019 (1). pp. 38-47. ISSN 26179695

O. Falodun, B. and O. Oke, M. and O. Fagbohun, O. (2018) MHD Natural Convection Casson Fluid Flow over a Non-Isothermal Stretching Sheet Embedded in a Porous Medium. Journal of Engineering Research and Reports, 2 (3). pp. 1-16. ISSN 2582-2926

Oladigbolu, Jamiu Omotayo and Rushdi, Ali Muhammad Ali (2020) Investigation of the Corona Discharge Problem Based on Different Computational Approaches of Dimensional Analysis. Journal of Engineering Research and Reports, 15 (3). pp. 17-36. ISSN 2582-2926

Pacelli, Vincenzo and Azzollini, Michele (2011) An Artificial Neural Network Approach for Credit Risk Management. Journal of Intelligent Learning Systems and Applications, 03 (02). pp. 103-112. ISSN 2150-8402

Palacz, Tomasz and Cieślik, Jacek (2021) Experimental Study on the Mass Flow Rate of the Self-Pressurizing Propellants in the Rocket Injector. Aerospace, 8 (11). p. 317. ISSN 2226-4310

Popov, Viktor and Yepifanov, Sergiy and Kononykhyn, Yevhenii and Tsaglov, Aleksandr (2021) Architecture of Distributed Control System for Gearbox-Free More Electric Turbofan Engine. Aerospace, 8 (11). p. 316. ISSN 2226-4310

Ray I. Gomez, Frederick (2018) Gilbert-Cell Mixer for WiMAX Applications. Journal of Engineering Research and Reports, 2 (3). pp. 1-9. ISSN 2582-2926

Rudenko, Oleg and Bezsonov, Oleksandr (2011) Function Approximation Using Robust Radial Basis Function Networks. Journal of Intelligent Learning Systems and Applications, 03 (01). pp. 17-25. ISSN 2150-8402

Rustam, Muradov and Khamidullo, Isakhanov and Khusanboy, Khosimov (2022) Methods for Reducing Seed Damage in the Technological Process of Cotton Processing. Engineering, 14 (03). pp. 119-130. ISSN 1947-3931

S.G. Andrae, Anders (2020) New perspectives on internet electricity use in 2030. Engineering and Applied Science Letter, 3 (2). pp. 19-31.

Saggese, Chiara and Sirignano, Mariano and Chen, Dongping (2022) Editorial: Particulate Matter Emissions From Conventional and Reformulated Fuel Combustion: Advances in Experiments and Simulations. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Sahu, Shikha and Mohanta, Harish Chandra (2021) A Pine Shaped Dual-Band Frequency Reconfigurable Antenna. Journal of Engineering Research and Reports, 20 (12). pp. 42-52. ISSN 2582-2926

Sayeed-Bin-Asad, S. M. and Lundström, T. Staffan and Andersson, A. G. and Hellström, J. Gunnar I. (2016) A Review of Particle Image Velocimetry for Fish Migration. World Journal of Mechanics, 06 (04). pp. 131-149. ISSN 2160-049X

Sekhar, Ravi and Sharma, Deepak and Shah, Pritesh (2022) Intelligent Classification of Tungsten Inert Gas Welding Defects: A Transfer Learning Approach. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Senyefia, Bosson-Amedenu and Francis, Eyiah-Bediako and Prince, Kusi (2020) A Statistical Study of Crime in Ghana. Journal of Engineering Research and Reports, 15 (3). pp. 6-16. ISSN 2582-2926

Shaheen, Yousry B. I. and Etman, Zeinab A. and Elrefy, Aya M. (2021) The Flexural Behavior of Ferrocement Composite Hollow-Cored Sections. Journal of Engineering Research and Reports, 20 (12). pp. 26-41. ISSN 2582-2926

Sheldon, Jason P. and Miller, Scott T. and Pitt, Jonathan S. (2014) Methodology for Comparing Coupling Algorithms for Fluid-Structure Interaction Problems. World Journal of Mechanics, 04 (02). pp. 54-70. ISSN 2160-049X

Spanelis, Apostolos and Walker, Alastair Duncan (2022) A Multi-Objective Factorial Design Methodology for Aerodynamic Off-Takes and Ducts. Aerospace, 9 (3). p. 130. ISSN 2226-4310

Tomilin, A. K. and Prokopenko, E. V. (2014) Non-Destructive Testing of Rods Using a Potential Component of a Magnetic Field. World Journal of Mechanics, 04 (02). pp. 37-43. ISSN 2160-049X

Tubreoumya, Guy Christian and Tiendrebeogo, Eloi Salmwendé and Bailou, Oumar and Dabilgou, Téré and Zeghmati, Belkacem and Dissa, Alfa Oumar and Koulidiati, Jean and Bere, Antoine (2022) Effect of Adsorbent/Adsorbate Couple on the Performance of Adsorption Solar Refrigerator. Engineering, 14 (03). pp. 95-112. ISSN 1947-3931

Uche Felix, Ikechukwu (2018) Comparative Analysis of Mono-Factorial Effects on Compressive Strength of Sandcrete Block Produced at Various Curing Age in the Warm Humid Climate of Nigeria. Journal of Engineering Research and Reports, 2 (3). pp. 1-9. ISSN 2582-2926

Umarov, Akmal and Akhmedhodjaev, Hamit and Ortiqova, Kamola and Nasriddinova, Zohida (2022) Determination of the Influence of the Speed of the Saw Cylinder of the Saw Gin on the Density, Speed and Composition of the Seed Roll. Engineering, 14 (03). pp. 131-137. ISSN 1947-3931

Wang, Tao and Bai, Jingsong and Li, Ping and Wang, Bing and Du, Lei and Tao, Gang and Xiao, Jiaxin (2016) The Growth of Richtmyer-Meshkov Instability under Multiple Impingements. World Journal of Mechanics, 06 (04). pp. 150-158. ISSN 2160-049X

Wang, Xinman and Li, Linyu (2022) A Sufficient Condition for 2-Distance-Dominating Cycles. Engineering, 14 (03). pp. 113-118. ISSN 1947-3931

Wang, Yanying (2022) Anisotropic TV Regularization in Electrical Impedance Tomography: An Experimental Study. Engineering, 14 (03). pp. 138-146. ISSN 1947-3931

Wang, Zhengzhi and Zhao, Huanyu and Liu, Senyun (2022) Numerical Simulation of Aircraft Icing under Local Thermal Protection State. Aerospace, 9 (2). p. 84. ISSN 2226-4310

Watanabe, Takashi and Toya, Yorinobu and Hara, Shota (2014) Development and Flow Modes of Vertical Taylor-Couette System with Free Surface. World Journal of Mechanics, 04 (03). pp. 90-96. ISSN 2160-049X

Yamaguchi, Ryuhei and Tanaka, Gaku and Liu, Hao and Hayase, Toshiyuki (2016) Fluid Vibration Induced in T-Junction with Double Side Branches. World Journal of Mechanics, 06 (04). pp. 169-179. ISSN 2160-049X

Zheng, Yang Yong- and Mei, Yao (2020) Analysis of Influencing Factors of Traffic Accidents in Undersea Tunnel. Journal of Engineering Research and Reports, 15 (3). pp. 37-49. ISSN 2582-2926

Zhong, Qin and Fan, Yonghua and Wu, Wenbin (2022) A Switching-Based Control Method for the Fairing Separation Control of Axisymmetric Hypersonic Vehicles. Aerospace, 9 (3). p. 132. ISSN 2226-4310

Book Section

Al-Hazeem, Nabeel Z. (2021) Manufacture of Human Gas Sensors to Determine the Causes and Treatment of Colon Diseases. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 105-110. ISBN 978-93-90888-71-9

Al-Musawi, Wisal Adnan and Wali, Wasan A. and Al-Ibadi, Mohammed Abd Ali (2024) FPGA Design of Image Encryption and Decryption Using Chua's Chaotic Masking and Artificial Neural Network. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 1-21. ISBN 978-81-969723-0-1

Annadurai, A. and Elakkiah, C. and Gopikrishnan, V. and Vignesh, A. and Manigundan, K. and Radhakrishnan, M. and Joseph, Jerrine (2020) Natural Green Corrosion Inhibitors for Mild Steel- A Review. In: Recent Developments in Engineering Research Vol. 1. B P International, pp. 33-38. ISBN 978-93-90149-19-3

Aragón-González, G. and Barragán-Santiago, I. and Huerta-Rizo, E. and León-Galicia, A. (2022) Alternative Automatic Bottling Machine for Alcoholic Beverages. In: Novel Perspectives of Engineering Research Vol. 9. B P International, pp. 134-148. ISBN 978-93-5547-239-7

Asadullah, Mohammed and Khan, S. A. and Asrar, Waqar and Sulaeman, E. and Quadri, Syed Azam Pasha (2021) Static Cylinder as a Base Pressure Controller in Supersonic Regime. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 111-122. ISBN 978-93-90888-71-9

Benrajesh, P. and Rajan, A. John (2021) Analytical Report on Exhaust Emission Optimization from Logistics & Packing Industries: A Green Logistical Approach. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 96-106. ISBN 978-93-90768-15-8

Elshereksi, Nidal W. and Ghazali, Mariyam J. and Muchtar, Andanastuti and Azhari, Che H. (2021) Titanium-based Additives for Dental Polymer Composites. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 75-95. ISBN 978-93-90768-15-8

Ferreira, Manuel Alberto M. (2024) ICEV Recycling in Environments with Limited Conventional Energy: Insights from a Queuing Model. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 145-159. ISBN 978-81-971164-7-6

Fondjo, Armand Augustin and Vuwane, Bongiwe and Theron, Elizabeth (2023) Improvement of Geotechnical Properties of Heaving Soils Using Alternative Methods: A Review. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 127-149. ISBN 978-81-967636-2-6

Giri, Poojitha Reddy and Reddy, Keerthana and Durisety, Hanusha and Pydimalla, Madhuri (2022) Optimization of Biodiesel Production from Jatropha curcas Oil by Base Catalyzed Transesterification Process. In: Technological Innovation in Engineering Research Vol. 1. B P International, pp. 36-48. ISBN 978-93-5547-378-3

Gopal, P. and Senthilkumar, T. (2020) Aerodynamic Drag Reduction in a Passenger Vehicle Using Vortex Generator with Varying Yaw Angles: Detailed Study. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 106-117. ISBN 978-93-89816-51-8

Gudmestad, Ove T. (2021) Weather Restrictions Posed on Marine Operations in the Barents Sea. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 107-119. ISBN 978-93-90768-15-8

Hertz, David (2022) Probability Problems and Estimation Algorithms Associated with Symmetric Functions. In: Novel Research Aspects in Mathematical and Computer Science Vol. 3. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 151-171. ISBN 978-93-5547-722-4

Ilboudo, Wend Dolean Arsène (2022) Impact of Desert Aerosols on the Solar Radiation of a Solar Central Photovoltaic (PV): A Modelling Approach. In: Novel Perspectives of Engineering Research Vol. 9. B P International, pp. 149-160. ISBN 978-93-5547-239-7

Jabeena, A. and Priyadarsini, M. Jasmine Pemeena and Yousuff, C. Mohamed (2020) Visible Light Communication Applications and Challenges. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 155-161. ISBN 978-93-89816-51-8

K., Madhukumar (2024) Advancing Sustainable Propulsion: A Holistic Examination and Optimization of a Six-Cylinder Compressed Air Radial Engine Design. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 96-116. ISBN 978-81-969723-0-1

Kharade, K. G. and Kharade, S. K. and Kumbhar, V. S. and Kamat, R. K. (2020) A Comparative Analysis of Using Indexed View to Improve the Performance of SQL. In: Recent Developments in Engineering Research Vol. 1. B P International, pp. 6-13. ISBN 978-93-90149-19-3

Krishna, Vempati and Rao, V. Purnachandar (2020) Region based Medical Image Compression with Binary Plane Coding: An Overview. In: Emerging Trends in Engineering Research and Technology Vol. 6. B P International, pp. 151-157. ISBN 978-93-90149-34-6

Kuchibhatla, S. Mani and Padmavathi, D. and Rao, R. Srinivasa (2023) Impact of Carrier Frequency in SSFC Controller with Grid Inter-Connected Wind System. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 150-161. ISBN 978-81-967636-2-6

Kumar, A. Raj and Bhushan, J. Y. V. Shiva (2022) Settlement Analysis of Soil Replaced with Fine Aggregate of Recycled Concrete as Foundation Material. In: Novel Perspectives of Engineering Research Vol. 9. B P International, pp. 126-133. ISBN 978-93-5547-239-7

Kumar, Kamalesh and Vivek, Gada (2020) Water Content Effect on Shear Strength Parameters in Coir Fiber Reinforced Pilani Soil: Recent Observations. In: Recent Developments in Engineering Research Vol. 1. B P International, pp. 1-5. ISBN 978-93-90149-19-3

Lazar, Maria and Faur, Florin and Apostu, Izabela-Maria (2024) Geotechnical Conditions of Mining Waste Dumps – A Necessary Investigation for their Reintegration into the Surrounding Landscape: A Case Study from Jiu Valley (Romania). In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 58-79. ISBN 978-81-969723-0-1

Li, Mochen and Nanda, Gaurav and Sundararajan, Raji (2021) Evaluating Different Machine Learning Models for Predicting the Likelihood of Breast Cancer. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 132-142. ISBN 978-93-90768-15-8

Oliveira, Raquel Salomé and Marques, António Torres and Simões, José and Torres, Cláudio (2020) Design of Active and Passive Solar Elements for Sustainable Contemporary Architecture: Scientific Overview. In: Recent Developments in Engineering Research Vol. 1. B P International, pp. 14-32. ISBN 978-93-90149-19-3

Prethi, K. N. Apinaya and Sangeetha, M. and Nithya, S. (2020) Hybrid Neural Network for Human Activity Recognition. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 133-140. ISBN 978-93-89816-51-8

Rao, G. Naga Malleshwara and Reddy, K. Hema Chandra (2020) An Overview of Influencing Parameters on Performance of a Mantle Heat Exchanger for a Solar Water Heater – A Simulation Study. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 118-132. ISBN 978-93-89816-51-8

Roufail, Reem and Klein, Bern (2022) Particle Breakage Mechanisms in a Horizontal Stirred Mill: A Morphological Study. In: Technological Innovation in Engineering Research Vol. 1. B P International, pp. 15-28. ISBN 978-93-5547-378-3

Salmasi, Farzin and Abraham, John and Nourani, Bahram (2022) Determining the Analysis of the Stability of Embankments against Sliding and Prediction of Sliding and Critical Factor of Safety. In: Novel Perspectives of Engineering Research Vol. 9. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 98-125. ISBN 978-93-5547-239-7

Sangeetha, S. P. and Divahar, R. and Aravind Raj, P. S. (2022) Assessment of Eco Friendly Bricks Manufactured using Waste Papers. In: Technological Innovation in Engineering Research Vol. 1. B P International, pp. 29-35. ISBN 978-93-5547-378-3

Saveljev, Vladimir (2020) Analysis of Depth in Integral, Multiview and Plenoptic Images by Using Multiview Wavelets. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 141-154. ISBN 978-93-89816-51-8

Shulgaq, Galia and Livcha, Sandra and Neiberte, Brigita and Verovkins, Anrijs and Vitolina, Sanita and Zhilinska, Elina (2021) The Ability of Different Lignins to Stabilize the Oil-in-water Emulsion. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 76-85. ISBN 978-93-90888-71-9

Sudhakar, Ambarapu and Daniel, Ravuri and Puli, Sreekanth and Mummana, Satyanarayana and Kolukula, Nitalaksheswara Rao and Rajanna, Bodapati Venkata (2024) Application of Intelligent Controllers in Speed Control of Synchronous Motor. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 22-57. ISBN 978-81-969723-0-1

Suglo, Raymond S. and Frimpong, Samuel and Brown, Osei Frimpong (2020) Calculations of Novel AFS Performance Modeling with Elliptical and Spherical Geometries. In: Recent Developments in Engineering Research Vol. 1. B P International, pp. 39-51. ISBN 978-93-90149-19-3

Szabó-Takács, Beáta and Takács, Tamás and Rocek, Ales (2024) Meteo Read: Client Software for Inserting Observed Atmospheric Data into MySQLTM Database. In: Theory and Applications of Engineering Research Vol. 2. B P International, pp. 151-165. ISBN 978-81-969141-0-3

Uduma, Kalu and Arciszewski, Tomasz (2021) Recent Developments of Sustainable Energy: The Key to a Stable Nigeria. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 64-75. ISBN 978-93-90888-71-9

Venkataraman, Nagaiyanallur Lakshminarayanan and Sumithra, Subramanian and Purushothaman, Ramaiah and Kumar, Subramani Suresh and Kokulavani, Kathiresan and Gowri, Velankanni (2024) Design and Implementation of Different Arbiter for Shared Resource Systems. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 80-95. ISBN 978-81-969723-0-1

Woo, Seong-woo and O’Neal, Dennis L. (2021) Advanced Study on Improving the Noise of Mechanical Compressor Subjected to Repetitive Pressure Loading. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 120-131. ISBN 978-93-90768-15-8

Yuan, Jing (2022) Thermodynamic Behavior of Process Volatile Organic Compounds (VOCs) in Oil Sands Environment Control and Its Influence on Solution. In: Technological Innovation in Engineering Research Vol. 1. B P International, pp. 1-14. ISBN 978-93-5547-378-3

Zlatanov, Vassil and Bachvarov, Stefan and Atanasova, Snezhana (2021) Studies on Analytical Determination of the Vibrations of a Load, Twice Elastically Suspended from an Elastic Beam via Another Load. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 86-104. ISBN 978-93-90888-71-9